Have a question?     Call 952.469.8240    |    Need service or parts?    Call 952.469.8230
Despatch PNF inert atmosphere cabinet furnace - Made in USA
 

PNF INERT ATMOSPHERE FURNACE

The PN Series Inert Atmosphere Ovens are designed to accommodate a wide variety of processes where an inert atmosphere is required to prevent product oxidation. Typical applications include curing, bonding and heat treating.

The PN Series contains a digital PID controller that is easy to use and configure, saving the operator time. It comes with two temperature ranges to meet your process needs. The stainless steel, continuously welded interior is ideal for highly corrosive conditions, or where interior cleanliness is critical. It has adjustable recirculating air louvers that allow fine tuning to ensure uniform airflow, even with varying load configurations, and consistent product heating. It also has an air-to-air heat exchanger for operation at low temperatures within a sealed chamber and for rapid cool down.

Despatch provides the design integrity, manufacturing experience and emphasis on quality necessary for dependable operation and excellent process control.

FCH Spec SheetPNF Spec Sheet

 
 

Standard Features:
  • Horizontal airflow for superior
    temperature uniformity
  • Maximum temperature
    538℃ (1000℉)
  • 9 cubic feet (255 liters)
  • Inert atmosphere capability
  • Heat exchanger for rapid cool down
  • Digital, easy to use, PID control
  • Stainless Steel interior
  • Adjustable recirculating air louvers ensure uniform airflow
  • Chamber pressure gauge
  • Positive sealing door for atmosphere integrity
  • UL and C-UL listed open industrial control panel

 

 

 

 

Options:
  • Programmable controls for controlling rate of temperature rise and process timing functions.
  • Recorders - 10 inch diameter round chart. Strip charts also available.
  • Oxygen concentration management system to guarantee low oxygen concentrations and prevent heating until desired oxygen level is achieved, ensuring optimal product results.
  • Process timers to automatically shut down oven at end of process.
  • Alarms, audible and visual to signal end of process or other events.
  • Disconnect switch in control panel to completely disconnect power to equipment. Disconnect switch must be opened before control cabinet door can be opened.
  • Door switch to shut down the heater and/or blower when door is open.
  • Door lock to prevent opening door during cycle to ensure process is not interrupted.
  • Capped access ports for pass through of wires and piping required for process.