Despatch burn-in ovens are engineered specifically for applications such as high
dissipation forward bias, high-temperature reverse bias, dynamic and static burn-in of
IC, RAM, ROM, microprocessors and other semiconductor devices.
Thermal Dissipation
High volume recirculating fans maintain consistent, uniform temperatures required by MIL
STD 883D while removing heat generated by the load.
Fixturing made easy
Rear wall is easily disassembled and removed to simplify fixturing of power leads or
feed-through boards into oven.
Horizontal Airflow
The PBC burn-in oven allows for traditional horizontal loading. Side to side horizontal
airflow provides uniform atmosphere flow across horizontally positioned loads.
Over-temperature Protection
Over-temperature protection control monitors maximum temperature and shuts off heater if
set point is exceeded.
Easy to use controls
Easy-to-use temperature controller featuring user-friendly arrow buttons for changing
setpoints. The controller also contains programmable EZ-Keys enabling simple one-touch
operation of repetitive user activities.
Controller communication includes EIA 232/485 Modbus® RTU and supports network
connectivity to a PC or PLC.
- Power supply cabinet is a standard E.I.A. 19in (48 cm) cabinet and aesthetically
matches the oven. 78in (198 cm) usable opening height.
- Increased dissipation allows increase in live load capacity without risking over
temperature.
- Automatic damper controls amount of incoming fresh air while saving energy.
- Rapid cool-down provides faster cycle times.
- Back up/Redundant Hi-Limit to provide temperature protection in the event the
primary device fails.
- Door switch to de-energize the heater and fan when the chamber access door is
opened.
- Access port at rear of oven for test connections.
- Casters on bottom of unit for mobility.
PBC/PNC SPEC SHEET
Standard Features:
- High volume recirculating fans maintain consistent, uniform temperatures
required by MIL STD 883D while removing heat generated by the load.
- Rear wall is easily disassembled and removed to simplify fixturing of power
leads or feed-through boards into oven.
- Traditional horizontal loading. Side to side horizontal airflow provides
uniform atmosphere airflow across horizontally positioned loads.
- Over-temperature protection control monitors maximum temperature and shuts
off heater if setpoint is exceeded.
- Easy-to-use temperature controller featuring user-friendly arrow buttons for
changing setpoints. The controller also contains programmable EZKeys
enabling simple one-touch operation of repetitive user activities.
- Ethernet connectivity with a PC or PLC using the Modbus TCP/IP communication
protocol.