Have a question? Call 952.469.8240   |   Need service or parts? Call 952.479.4112
Request a Quote

Request a Quote

Email Us or Call 1-952-469-5424
(USA: 1-800-828-9903)


You May Also Be Interested In:

Standard Features:

  • Delivered ready for production
  • Simple, touch-screen operator control
  • Economical for small part or low production runs
  • Easy to install
  • Excellent uniformity (± 5°F)
  • Automatic operation
  • Quench tank agitation standard
  • Quench tank heater


  • Alternate instrumentation
  • Basket design and construction
  • Installation and startup

Product Specialists

Horizontal Solution Heat Treat Furnace

The horizontal solution heat treat furnace is used for heat treating smaller components and provides many of the features of more expensive drop bottom type furnaces.

Installation effort required for this furnace is minimal. The furnace utilizes a powered roller conveyor system and a pneumatically operated quench elevator located directly in front of the furnace above the quench tank. The elevator is complete with guide columns and a powered roller conveyor system and is shipped preassembled ready for immediate set-up. Air piping and interconnecting wiring from the furnace to the control cabinet must be accomplished in the field. The door is pneumatically clamped against the furnace front for a tight seal.


The operator loads the work basket onto the load and unload conveyor. The furnace is preheated. When the operator pushes the cycle start button, the furnace door opens automatically and the work basket is conveyed across the quench elevator roller bed and into the furnace. A heat cycle timer is set for the required heat cycle. After the heat cycle is completed, the furnace door automatically opens and the work basket is conveyed onto the quench elevator. The furnace door automatically closes after the work basket has exited the furnace and the work basket is then quenched automatically. The work basket is automatically raised from the quench tank, allowed to drip dry, then is conveyed to the load and unload conveyor station for removal by the operator.


  • Quench time: 7 - 10 seconds
  • Capacity, load weight: Maximum of 650lbs
  • Quench tank agitation: Propeller type mixer
  • Maximum operating temperature: 593°C/1100°F
  • Electricity: 480/3/60
  • Air: 100 PSIG
  • Water: City
  • Exhaust: None
footer    © Copyright ITW, 2018, All Rights Reserved.    Home/Site Map/Contact Us     Follow us on: Twitter | LinkedIn | YouTube

Despatch is a member of ITW EAE, A division of Illinois Tool Works, Inc. For more information visit www.itweae.com  Privacy Statement