{"id":3388,"date":"2020-03-12T12:49:26","date_gmt":"2020-03-12T12:49:26","guid":{"rendered":"https:\/\/www.despatch.com\/blog\/?p=3388"},"modified":"2023-03-15T12:50:29","modified_gmt":"2023-03-15T12:50:29","slug":"how-are-contact-lenses-made","status":"publish","type":"post","link":"https:\/\/www.despatch.com\/blog\/how-are-contact-lenses-made\/","title":{"rendered":"Contact Lenses: Overview & Manufacturing Process"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t
\n\t\t\t\t

Contact lenses have been around for centuries, with the earliest known evidence of their use dating back to ancient Greece, where philosophers such as Hippocrates and Pliny the Elder wrote about the use of glass to correct vision. In the late 19th century, German glassblower F.E. Muller created the first successful glass contact lenses. However, it wasn’t until the 1930s that plastic contact lenses were developed, and they were first made available to the public in the 1950s.<\/p>\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t

How Do Contact Lenses Work<\/h3>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t
\n\t\t\t\t

Contact lenses work by correcting vision through the use of a small, curved lens that sits directly on the eye’s surface. The lens is designed to refract light in a way that corrects the eye’s refractive error, which is what causes blurry vision. Contact lenses can be used to correct nearsightedness, farsightedness, astigmatism, and presbyopia.<\/p>\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t

What Are Contact Lenses Made of?<\/h3>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t
\n\t\t\t\t

Contact lenses are made either out of glass (hard lenses) or silicone hydrogel (soft lenses). In both cases, they feature some level of oxygen permeability, which is an indispensable requirement for the wearer\u2019s comfort. <\/p>

Glass lenses are not commonly used today, as they are less comfortable and less permeable to oxygen than silicone hydrogel lenses.<\/p>

There are also hybrid contact lenses made out of rigid gas-permeable plastic and featuring a peripheral fitting zone that is softer than the optical part, but these are generally rare. The hydrogel monomer resin is the most popular choice of the three, as the spectrum of applications for softer contact lenses is a lot wider.<\/strong><\/p>\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

The Manufacturing Process of Contact Lenses<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t
\n\t\t\t\t

The most widely used method of manufacturing contact lenses<\/a> is molding. The material is added in rotating molds and then shaped by centripetal forces or added and revolved at high speed to take its shape inside the rotating mold. <\/p>

After the lens gets its shape, the silicone hydrogel resin needs to be heat-cured in order to be polymerized.<\/strong> For this purpose, lab ovens need to be brought into play. The thermal curing cycles for the hydrogel may last for up to 34 hours, depending on the size and thickness of the contact lenses. Throughout this whole time period, the heating must remain uniform and within the specified stringent range. As this process takes place, sterilization is also happening as a side effect, which is crucial for contact lenses.<\/p>

The steps involved in the manufacturing of a contact lens are as follows:<\/p>

  1. Raw Material Selection:<\/strong> The first step in contact lens manufacturing is to choose the raw materials that will be used to make the lens. These materials include monomers, pigments, and other additives that are used to make the lens material.<\/li>
  2. Monomer Mixture:<\/strong> The monomers are mixed together in a specific ratio to create the base polymer that will be used to make the lens. The mixture is then subjected to polymerization<\/a> to create the lens material.<\/li>
  3. Polymerization:<\/strong> Polymerization is the process of chemically linking the monomers together to form a solid material. This process can be performed in a variety of ways, including bulk polymerization, cast molding, and lathe cutting.<\/li>
  4. Lathe Cutting:<\/strong> Lathe cutting is the process of cutting the lens material into the desired shape. This is done using a lathe machine that is specifically designed for contact lens manufacturing.<\/li>
  5. Surface Finishing:<\/strong> After the lens has been cut to shape, it is subjected to a series of surface finishing processes to improve its surface quality and to ensure that the lens is optically correct. This may include processes such as polishing, coating, and surface modification.<\/li>
  6. Quality Control:<\/strong> Once the lens has been manufactured, it is subjected to a series of quality control tests to ensure that it meets the required specifications. These tests may include measurements of the lens thickness, curvature, and refractive power.<\/li>
  7. Sterilization:<\/strong> Before the lens is packaged and shipped, it is subjected to a sterilization process to ensure that it is free from any harmful contaminants. This may include gamma radiation sterilization or ethylene oxide sterilization.<\/li>
  8. Packaging:<\/strong> The final step in the contact lens manufacturing process is to package the lenses in a sterile environment and to label the packaging with the appropriate information, including the expiration date and the recommended care instructions.<\/li><\/ol>

    These are the basic steps involved in the manufacturing of a contact lens. Depending on the specific requirements of the lens, additional steps may be required, such as coloring, patterning, or the addition of other features.<\/p>\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t

    Contact Lens Manufacturing - Special Requirements<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t
    \n\t\t\t\t

    Contact lenses are very delicate products, and at the same time, they are supposed to attain very specific physical properties and optical characteristics. This calls for high levels of manufacturing precision, accuracy, and caution. As expected, for all these prerequisites, there\u2019s an extensive list of special requirements that need to be met otherwise the lenses will have a defect. Here are the most important of these requirements:<\/p>